Guys, please help me on how to replace the whole ADU unit in this machine. The wires are eaten by rats & even the rollers. The plates are deformed, only the fusing unit will retain and attached to the one i will replace.
Thanks in advance....
Guys, please help me on how to replace the whole ADU unit in this machine. The wires are eaten by rats & even the rollers. The plates are deformed, only the fusing unit will retain and attached to the one i will replace.
Thanks in advance....
A service manual will help you.
Last edited by laitang; 05-28-2015 at 05:10 PM.
It's really easy, take off the fuser, take the screws off that hold it to the rail and then take off the unbilical.
Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
three to four screws on the left and right kind of hidden within the rail system you have to move the adu out to the sweet spot to see these screws. Then there is a massive connector behind the fuser, a ground wire if I remember correctly, and maybe a few other small connectors also behind the fuser, they should be under a metal shroud, removable with a phillips type screw.
Thank you gentlemen for all the inputs...
Bookmarks