km5530

[Franky Tan]

hello ! every copier tech in the world, i need some solution for my copier machine ,after i change one solenoid which is located at fixing unit to active paper guide to exit but its fail .later i replaced two clutchs from duplex ,the paper still jam at duplex .the paper failed to flow out to receiving tray.your help is greatly appreacted.

[jimbo1]

The eject section has a one way bearing in it that can cause problems like this. I carry one in my car stock. Sorry I don't have the part number handy but it will cause all sorts of jamming and especially if it is not passing through that section.

[Franky Tan]

	Quote:			Originally Posted by jimbo1
	The eject section has a one way bearing in it that can cause problems like this. I carry one in my car stock. Sorry I don't have the part number handy but it will cause all sorts of jamming and especially if it is not passing through that section.

Hi !may i know where is the location of the one way bearing ?

[10871087]

What "jam number" are you getting?

[Franky Tan]

	Quote:			Originally Posted by 10871087
	What "jam number" are you getting?

I forgot to remember the number.