The reason you thread cannot be answered is because there is the word "print" at the end of the title. The forum takes that to mean that you wanted the "printable view" without links. And without links, noone can answer.
Personally I think that you probably have a broken transfer bushing at the rear, and that the contact spring is missing. The transfer that you are getting is just due to pressure and proximity. You can confirm this by emergency stopping the machine, and examining the developed image on the drum. If the image is properly developed, then you are losing transfer.
Personalmente penso che probabilmente hanno una boccola trasferimento rotto nella parte posteriore, e che la molla di contatto è mancante. Il trasferimento che si stanno ottenendo è solo a causa della pressione e di prossimità. È possibile confermare questa arresto di emergenza della macchina, ed esaminando l'immagine sviluppata sul tamburo. Se l'immagine è correttamente sviluppata, allora state perdendo il trasferimento.
=^..^=
Bookmarks