Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Junior Member
    Join Date
    Jul 2015
    Posts
    4
    Rep Power
    0

    kyocera taskalfa 300ci

    WOW! recently found out about smarka. what a surprise.
    Glad I found y'all. I've never posted a question on this site.
    This is a valuable resource for me.

    IT was suggested (no names) I do a "U410 or U411 auto scan adjust" for this machine. (B/W a little faint).
    So, I accidentally/on purpose started procedure before realizing you have to have the "test charts" to do it. didn't READ INSTRUCTION details. DUMB, I should know better.
    I have the manuals. (for what it's worth)

    Machine will print & receive fax fine.
    WILL NOT scan or copy. solid black image. HELP!!

    Anyway, was hoping someone out there could help me find/get these adjustment charts.
    Part #'s are:302FZ56990, 302AC68243, 303JX57010, 303JX57020.

    Or maybe someone knows a better way to get the scanner working again.

    Thanks everybody.
    Terry


  2. #2
    Master Of The Obvious 10,000+ Posts
    kyocera taskalfa 300ci

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,218
    Rep Power
    245

    Re: kyocera taskalfa 300ci

    The only way to recover the scanner is to buy the test charts, and they're expensive. Contact your local Kyocera dealer. The most expensive one is over $100USD. If you ever have to replace a scanner control board, you'll need to follow this same procedure to calibrate the CCD and/or CIS.

    It's a good idea to read how a simulation is executed in the manual before you try it .. but you've already learned that, I hope. =^..^

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Junior Member
    Join Date
    Jul 2015
    Posts
    4
    Rep Power
    0

    Re: kyocera taskalfa 300ci

    Thanks y'all.

    got the cart (about $100) did the procedure and all is well.
    Only needed the color chart (56990).

    I appreciate your help.
    Terry


  4. #4
    Technician
    Join Date
    Jul 2011
    Location
    new york,ny
    Posts
    16
    Rep Power
    13

    Re: kyocera taskalfa 300ci

    Hi,
    Hopefully you Kyocera experts can help me out please.
    Trying to replace the black developer on a 300ci.
    Following the instructions in the service manual.My tech cannot remove the "image formation holder".
    He took out all the screws, holds down the tabs, left and right, but something in the middle is preventing it from being removed.
    Please Help
    Very Frustrated

    Regards & Thanks,

    Ron


  5. #5
    Master Of The Obvious 10,000+ Posts
    kyocera taskalfa 300ci

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,218
    Rep Power
    245

    Re: kyocera taskalfa 300ci

    There are 5 screws. Did you get them all? One at each corner by the latches, two in the waste container opening, one screw dead center in a deep valley. Have you removed the toner cartridges first? Have you unplugged the connector to the hopper? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  6. #6
    Technician
    Join Date
    Jul 2011
    Location
    new york,ny
    Posts
    16
    Rep Power
    13

    Re: kyocera taskalfa 300ci

    Thanks for the reply.
    He did all of that & there is something holding it in the middle.
    ???


  7. #7
    Field Supervisor 1,000+ Posts subaro's Avatar
    Join Date
    Oct 2010
    Posts
    1,129
    Rep Power
    30

    Re: kyocera taskalfa 300ci

    Quote Originally Posted by compucal View Post
    Thanks for the reply.
    He did all of that & there is something holding it in the middle.
    ???
    After you remove the five screws, you have to press and hold the two levers located on each side of the holder and then pull towards you.

    THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke

  8. #8
    Technician
    Join Date
    Jul 2011
    Location
    new york,ny
    Posts
    16
    Rep Power
    13

    Re: kyocera taskalfa 300ci

    Thanks,T
    Tech said he did all of that, and still something holding it in the middle.
    Doesn't want to force it and yank it off.
    ????


  9. #9
    Field Supervisor 1,000+ Posts subaro's Avatar
    Join Date
    Oct 2010
    Posts
    1,129
    Rep Power
    30

    Re: kyocera taskalfa 300ci

    BY the way, you sort of hijack this thread. This is a new problem and you should have started a new post.
    anyway, Five larger screws and on the right side of that same holder there is a door with a connector and one smaller screw to be removed also. also the waste toner entire tray should be removed. pull the tray out and push in the two tabs on either side and pull out.
    then there is nothing that would hold that cover in there. pg. 326 of the service manual.

    THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here