Results 1 to 7 of 7
  1. #1
    certified scrub 500+ Posts
    TA620 adding toner none stop.

    jmaister's Avatar
    Join Date
    Aug 2010
    Location
    somewhere i prefer not to share
    Posts
    754
    Rep Power
    41

    TA620 adding toner none stop.

    The machine also says check toner cartridge. (not my actual call so i dont know the detail)

    We are thinking along the line of toner sensor, toner supply motor, or DV? KDA has a 6030 case where the toner supply drive was replaced.

    Has anyone else encountered one? what was the solution if you could kindly share?

    thx.
    Idling colour developers are not healthy developers.

  2. #2
    Owner/Service Manager 1,000+ Posts
    TA620 adding toner none stop.

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: TA620 adding toner none stop.

    Set U152 to off.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  3. #3
    Master Of The Obvious 10,000+ Posts
    TA620 adding toner none stop.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: TA620 adding toner none stop.

    I had a brand new CS-8030 that would not add toner right out of the box. There was a deformation of the "D" shaped bore in the toner cartridge drive coupler. With the right side cover off, I could easily observe what was happening. The coupler would not spring back because it was too tight on the "D" shaft. Ten minutes with my jewelers files fixed that. I opened up the bore just enough to let it slide on the shaft. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    368
    Rep Power
    25

    Re: TA620 adding toner none stop.

    I would try replacing developer unit 1st.

  5. #5
    Technician JUAN C DLS's Avatar
    Join Date
    Mar 2014
    Location
    LOS ANGELES, ca
    Posts
    14
    Rep Power
    21

    Re: TA620 adding toner none stop.

    Check toner sensor with simulation.if sensor is reading ok, then
    Vacuum and clean the DV unit, then run DV set up again.

  6. #6
    Copyguy71
    Guest

    Re: TA620 adding toner none stop.

    The toner drive gear on this model has a one way bearing that will strip, causing the machine to constantly run searching for toner. I've had to replace the toner drive pack many times

  7. #7
    certified scrub 500+ Posts
    TA620 adding toner none stop.

    jmaister's Avatar
    Join Date
    Aug 2010
    Location
    somewhere i prefer not to share
    Posts
    754
    Rep Power
    41

    Re: TA620 adding toner none stop.

    ding ding, turns out it was developer.

    thx gents for all the inputs!
    Idling colour developers are not healthy developers.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here