Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Jul 2008
    Location
    Phoenix, Arizona
    Posts
    34
    Rep Power
    32

    KM-5050i LCF PF-750 registering paper size as A4 not letter

    I usually work on HP printer/mfp's, but I have a customer that has a KM-5050i with LCF PF-750 and it is registering paper size as A4 not letter. Everything looks normal, trying to find out if there is a switch that registers size in the feeder assy? Or is it in the settings somewhere? Any help would be appreciated.

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Posts
    188
    Rep Power
    22

    Re: KM-5050i LCF PF-750 registering paper size as A4 not letter

    If you go into your cassette settings, you should find that the paper size is set to either A4 or Auto (Metric). You can change it to Auto (Inch) or Letter.

    The PF-750 actually has front and rear adjusters to accomodate A4/LTR as well as center adjust, but there are no sensors associated with them.
    Last edited by wragsdale; 09-02-2015 at 04:57 PM.

  3. #3
    Master Of The Obvious 10,000+ Posts
    KM-5050i LCF PF-750 registering paper size as A4 not letter

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: KM-5050i LCF PF-750 registering paper size as A4 not letter

    Take a look at simulation U208. (Pg 94 of the PF750 service manual). =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Technician
    Join Date
    Jul 2008
    Location
    Phoenix, Arizona
    Posts
    34
    Rep Power
    32

    Re: KM-5050i LCF PF-750 registering paper size as A4 not letter

    Thanks I will check out both suggestions when i go back with the tray1 lift motor that blew out.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here