Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Technician BabblingXombie's Avatar
    Join Date
    Jun 2015
    Posts
    32
    Rep Power
    18

    Kyocera cs-420i Email Issues.

    Hi all. I'm having issues with a cs-420i email. I just did a firmware update and am trying to fix issue.
    I know the ip address and dns is right. Its error 3101 and it gives the error instantly.

    Any help i would appreciate it. Thanks Guys

  2. #2
    Senior Tech 250+ Posts
    Kyocera cs-420i Email Issues.

    blsquires's Avatar
    Join Date
    Nov 2008
    Location
    perth
    Posts
    343
    Rep Power
    44

    Re: Kyocera cs-420i Email Issues.

    two things to check .make sure your sender address is correct this is very important ie harry@whatever.com.au this would work hary@whatever.com this wouldn't work
    and dont turn on authentication protocol
    hope this helps

  3. #3
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: Kyocera cs-420i Email Issues.

    Did the firmware update complete itself fully to the end of the install ?

    If the firmware update was in error, you could try installing the "relevant" firmware one at a time on the USB stick.
    Wait for it to complete.....
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  4. #4
    Technician BabblingXombie's Avatar
    Join Date
    Jun 2015
    Posts
    32
    Rep Power
    18

    Re: Kyocera cs-420i Email Issues.

    The firmware update completed but it was doing the same thing before update.
    I'm Not sure what the issue is.It says connection is ok when i test it but it wont send email.
    Very strange

  5. #5
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: Kyocera cs-420i Email Issues.

    How are you setting up the Network settings ?
    At the MFD panel or via WebSettings ?

    I assume you've done an MDF - Laptop direct test ?
    Do the usual <cmd.exe /k ipconfig /all> on the PC and see if the settings match the MFD.
    Take the MFD off fixed IP and see if you get the network DHCP server response update to the MFD.

    Apart from the username and passwords being changed,
    I assume it is a DNS server problem.

    Where are you trying to send the email. Do you have a dummy or test email address you can use to test with ?
    I send MFD email to my own private email then read it back from my IPhone to make sure it worked.
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  6. #6
    Field Supervisor 500+ Posts
    Kyocera cs-420i Email Issues.


    Join Date
    May 2009
    Location
    Concord, NH
    Posts
    770
    Rep Power
    53

    Re: Kyocera cs-420i Email Issues.

    What have you set under the SMTP settings? Are you trying to send through an Exchage server or an SMTP server? I have seen this error if you have the wrong port setup in the smtp settings, not all smtp servers use the common port 25. Does the outgoing mail server require a secure connection? The 3101 error, which is the outgoing mail server is not responding, indicates to me that the server is ignoring the request to send an email either because the username/password you have setup for SMTP is incorrect or does not have the correct privilages to send. Also, what operating system does the customer use? From Windows server 2012 on, using Exchange Server, the specific IP address/Device Name has to be enabled in Exchage to send via SMTP otherwise it is rejected. Hope this helps a little.

  7. #7
    Technician BabblingXombie's Avatar
    Join Date
    Jun 2015
    Posts
    32
    Rep Power
    18

    Re: Kyocera cs-420i Email Issues.

    Thanks for your help guys.

    It is a smtp server thru gmail (my personal email just to test) I have tried many ports and it says connection ok but nothing sends and i get that error code 3101... Yeah I'm thinking dns.
    And I have tried laptop direct connect and same thing happened.


  8. #8
    Field Supervisor 500+ Posts
    Kyocera cs-420i Email Issues.


    Join Date
    May 2009
    Location
    Concord, NH
    Posts
    770
    Rep Power
    53

    Re: Kyocera cs-420i Email Issues.

    Gmail? Uggh! Had a customer a couple of years ago have this problem with Gmail. We eventually wound up bouncing the out going mail through the customers ISP SMTP server to Gmail. Gmail uses old standards that are incomptiable with newer MFP's. Try using the smtp server from their ISP.

  9. #9
    Senior Tech. 2,500+ Posts NeoMatrix's Avatar
    Join Date
    Nov 2010
    Location
    Sunshine State QLD.
    Posts
    3,514
    Rep Power
    104

    Re: Kyocera cs-420i Email Issues.

    Quote Originally Posted by NeoMatrix View Post
    If you decide to use Gmail SSL/TLS your server Ports will be :
    Outgoing : 465 (smtp)
    Incoming : 995 (PoP)

    example:
    pop.gmail.com (incoming)
    smtp.gmail.com(outgoing)


    Normal Email.
    Outgoing : 25
    Incoming : 110

    I use PoP because I can store email to local folders and delete immediately off the server.

    HTH
    Previous post from another forum.
    Inauguration to the "AI cancel-culture" fraternity 1997...
    •••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••

  10. #10
    Owner/Service Manager 1,000+ Posts
    Kyocera cs-420i Email Issues.

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: Kyocera cs-420i Email Issues.

    It has nothing to do with DNS. Using the IP address of the mail server would negate the use of DNS. These machines don't support SSL/TLS encryption.
    You can use aspmx.l.google.com to scan to a gmail hosted domain without authentication. You would need to set up stunnel or something else to do the encryption for you if going out of your domain. I have an account hosted through Rackspace for use with older MFP's without encryption.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here