Thanks: 0
Likes: 0
Dislikes: 0
I was in the web access of the Copystar CS400I but i could not change any thing to set scanning to email
the PW i used was admin00 but this didnt seem to get me where i needed
what is the default PW to be able to change things in web access?
or
where can i set this up from the panel...?
i mainly do Ricoh /sharp so this is new to me
Thanks
Lets start with an existent model number. There is no CS-400i.
How about 400ci, 420i, 4035, C4035E, or 4050? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
sorry , it was a CI and thanks but i figured it out
Im not an everyday Kyocera/Copystar tech, so my model was a little off
Posting Permissions
Reply With Quote
Bookmarks