Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Feb 2011
    Location
    Las Vegas
    Posts
    104
    Rep Power
    15

    420i - intermittent C4100

    Several months ago this machine came up with a C4100. I ended up replacing the LSU with a known working one out of another machine. It has run fine until about a week ago when the C4100 appeared again. I was able to reset it, but now the customer has called back and said the error has returned. I am going back out today to check the connections on the main pcb. Has anyone else seen this. Thanks in advance


  2. #2
    Master Of The Obvious 10,000+ Posts
    420i - intermittent C4100

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,214
    Rep Power
    245

    Re: 420i - intermittent C4100

    Two other reasons you might get laser codes on Kyocera MFPs are 1) primary charge arcing, or 2) intermittent doorswitches. Check both. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Feb 2011
    Location
    Las Vegas
    Posts
    104
    Rep Power
    15

    Re: 420i - intermittent C4100

    Thanks, I was going to check the door switches today but I had forgotten about the main charge. I will take out another just in case.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here