Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: TA250CI

  1. #1
    Technician
    Join Date
    Jan 2007
    Location
    star prairie,wi
    Posts
    25
    Rep Power
    22

    TA250CI

    what happened to print density adjustment under Adjustment/Maintenance in Management Mode
    Firmware Version 2H7_2F00.012.012 2011.07.14 is this a firmware issue or something else?


  2. #2
    Master Of The Obvious 10,000+ Posts
    TA250CI

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,221
    Rep Power
    245

    Re: TA250CI

    Quote Originally Posted by garyk View Post
    what happened to print density adjustment under Adjustment/Maintenance in Management Mode
    Firmware Version 2H7_2F00.012.012 2011.07.14 is this a firmware issue or something else?
    "print density adjustment under Adjustment/Maintenance?" Unless it appears under some other name, I have never seen this print density adjustment that you speak of, on any Kyocera. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Jan 2007
    Location
    star prairie,wi
    Posts
    25
    Rep Power
    22

    Re: TA250CI

    on page 1-3-148 of service manual for kyocera TA 250CI shows this under Adjustment/Maintenance under pressing system menu key;also i just recently saw print adjustment on a km2560 in same place as above


  4. #4
    Master Of The Obvious 10,000+ Posts
    TA250CI

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,221
    Rep Power
    245

    Re: TA250CI

    Quote Originally Posted by garyk View Post
    on page 1-3-148 of service manual for kyocera TA 250CI shows this under Adjustment/Maintenance under pressing system menu key;also i just recently saw print adjustment on a km2560 in same place as above
    We must not have the same version of the manual. 1-3-148 of the Service Manual R7 describes U906 through U910 service modes.

    For System Menu > Adjustment/Maintenance you might take a look at the Operators Guide R12.23 pg 8-54, which does not have a print density adjustment. AFAIK, it never had.

    The only print density adjustment adjustment that I am aware of is a PreSribe command. For monochrome prints the default value is "3". To set print density to 4 (make the prints darker) send: !R! FRPO D4,4;EXIT;
    If the same adjustment is available for color prints, I'm not aware of it. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #5
    Master Of The Obvious 10,000+ Posts
    TA250CI

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,221
    Rep Power
    245

    Re: TA250CI

    Quote Originally Posted by garyk View Post
    on page 1-3-148 of service manual for kyocera TA 250CI shows this under Adjustment/Maintenance under pressing system menu key;also i just recently saw print adjustment on a km2560 in same place as above
    I did see the reference to print density adjustment on pg 1-3-164 of my SM, but in 7 years I have never seen it, and I have looked for it.
    Try the PreScribe command. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here