Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2012
    Location
    harare
    Posts
    128
    Rep Power
    0

    taskalfa 4820w ,process unit error ,E-070

    This plotter is suddenly showing error " process unit error, e-070,open close process unit", tried to check for anything that is not sitting properly .Could it be one of those errors that need resetting using IPS or something is wrong somewhere. Has anyone ever had this problem before? At times its showing a different error saying "roller feeder communication error", could it be a dirty photo sensor or pulse sensor or something else?( though i have cleaned them)

    any suggestions are welcome.

    failure is not an option !

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Oct 2010
    Posts
    484
    Rep Power
    23

    Re: taskalfa 4820w ,process unit error ,E-070

    Open the back and reseat every connector you can find. The controller especially.


  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2012
    Location
    harare
    Posts
    128
    Rep Power
    0

    Re: taskalfa 4820w ,process unit error ,E-070

    thanks man, it happened that one of the black connectors on the dev unit was not securely connected, its working perfectly well now.its so hidden than you could not see it.

    failure is not an option !

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here