Thanks: 
Likes: 
Dislikes: Hi I was routine cleaning of my dp km 6030,after clean my machine i face code c0410.i dont know what to do now ,i have clean and check dp main pwb with ctc and dry well but same result code appear and dp is not working,
km 6030 code c0410
Hi I was routine cleaning of my dp km 6030,after clean my machine i face code c0410.i dont know what to do now ,i have clean and check dp main pwb with ctc and dry well but same result code appear and dp is not working,
remove the adf cable that connects at the rear of the machine and reinstall. routine cleaning should not cause any major problems, unless you were using liquids when the power was on.
1087 1087 gets you to service mode. run u906 to do disable reset.
THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke
subaro covered that quite nicely. You will need to do a Partial Reset to restore function. =^..^=Originally Posted by subaro
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks