I was wondering if someone could tell me how to change the warm up display on this machine. I picked up a used machine and it has the logo of another company on the warm up screen. When I went to class on this machine I remember the instructor briefly went over the procedure but I not longer remember how change it back or put my logo on there. Any help would be appreciated. Thanks!
if you have access to the class, you should have access to the manual no?
u224 - Panel sheet extension
Idling colour developers are not healthy developers.
All you have to do is clear out the custom Splash file and the machine will return to the normal display. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
thanks.. got it resolved. BTW.. Blackcat found an older thread where you told how to install the image. I ended up putting our company image on the warm up screen
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks