Kyocera Taskalpha 4550ci user login

[blazebusiness]

How do I disable the user login feature?

Need advice on a Kyocera Taskalpha 3550_4550_5550ci series color mfp. We do a ton of work on Ricoh,Canon and Konica but not a lot of Kyocera's. A local customer picked up a super low meter unit but the display is asking for a user login. In an effort to be very specific...... I am not asking for the admin or command center logins---just want to remove the user login requirement... Do I just reset this by initializing the machine in U021 mode? Also, tried to enter service mode (manual says 10871087) but service mode did not come up. Does the user login condition also lock me out of the service mode on this model or am I missing a something?

[blazebusiness]

{Also,posting the following default Admin password info info for the color Kyocera's that I ran across just in case it might help others in the future:}

Command Center Username & Password


FS-C2526MFP----------admin00
FS-C2626MFP----------admin00
205c------Nothing when default admin00
255c-----------------admin00
250ci----------------admin00
300ci----------------admin00
400ci----------------admin00
500ci----------------admin00
552ci----------------admin00
2550ci-------------Admin Admin
3050ci-------------Admin Admin
3550ci-------------Admin Admin
4550ci-------------Admin Admin
5550ci-------------Admin Admin
6550ci-------------Admin Admin
7550ci-------------Admin Admin

Machine-------Username & Password

FS-C2526MFP----- Admin Admin
FS-C2626MFP----- Admin Admin
205c ------------Admin Admin
255c ------------Admin Admin
250ci -----------2500 2500
300ci----------- 3000 3000
400ci----------- 4000 4000
500ci----------- 5000 5000
552ci----------- 5500 5500
2550ci---------- 2500 2500
3050ci-----------3000 3000
3550ci---------- 3500 3500
4550ci---------- 4500 4500
5550ci---------- 5500 5500
6550ci---------- 6500 6500
7550ci---------- 8000 8000


--------------------------------------------And the Monochrome logins:------------------------------------------------------------------------------------------------------------------------------------------------------

Command Center

Model ============Username Password

Monochrome
FS-2100DN-----------Admin Admin
FS-4100DN-----------Admin Admin
FS-4200DN-----------Admin Admin
FS-4300DN-----------Admin Admin
FS-1028MFP------------admin00
FS-1030MFP------------admin00
FS-1035MFP------------admin00
FS-1128MFP------------admin00
FS-1130MFP------------admin00
FS-1135MFP------------admin00
FS-3040MFP------------admin00
FS-3140MFP------------admin00
FS-3140MFP+-----------admin00
FS-3540MFP------------admin00
FS-3640MFP------------admin00
FS-6525MFP----------Admin Admin
FS-6530MFP----------Admin Admin
305-------------------admin00
300i------------------admin00
420i------------------admin00
520i-No Default-------admin00
3500i---------------Admin Admin
4500i---------------Admin Admin
5500i---------------Admin Admin
6500i---------------Admin Admin
8000i---------------Admin Admin



Machine Username & Password
Model# //Username Password
FS-2100DN Admin Admin
FS-4100DN Admin Admin
FS-4200DN Admin Admin
FS-4300DN Admin Admin
FS-1028MFP 2800 2800
FS-1030MFP 3000 3000
FS-1035MFP 3500 3500
FS-1128MFP 2800 2800
FS-1130MFP 3000 3000
FS-1135MFP 3500 3500
FS-3040MFP 4000 4000
FS-3140MFP 4000 4000
FS-3140MFP+ 4000 4000
FS-3540MFP Admin Admin
FS-3640MFP Admin Admin
FS-6525MFP 2500 2500
FS-6530MFP 3000 3000
KM-2560 2500 2500
KM-3060 3000 3000
620 6200
820 8200
181 1800
221 2200
255 Admin Admin
305 Admin Admin
300i 3000 3000
420i 4200 4200
520i 5200 5200
3500i 3500 3500
4500i 4500 4500
5500i 5500 5500
6500i 6500 6500
8000i 8000 8000

[subaro]

1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. Refer to Adding a User
(Local User List) on page 10-5 for the default login
user name and password.
4 Press [Next] of Job Accounting Setting, and then
[Change] of Job Accounting.
5 Press [On]. To disable job accounting, press [Off].
6 Press [OK].

[blazebusiness]

1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. Refer to Adding a User
(Local User List) on page 10-5 for the default login
user name and password.
4 Press [Next] of Job Accounting Setting, and then
[Change] of Job Accounting.
5 Press [On]. To disable job accounting, press [Off].
6 Press [OK].

User login info was lost and certainly appreciate the reply but-----When you press the System menu key nothing happens. What do you think about trying to clear this in U021 by logging into service mode?

[subaro]

maybe the system menu is locked out. check with the below sequences and see.
1087 1087 gets you into service mode.


U223 Operation panel lock
Description
Sets the operation panel lock function.
Purpose
This is performed to inhibit operating and canceling the system menu on the operation panel
which may be done by others then an administrator.
Setting
1. Press the start key.
2. Select the item.
Initial setting: Unlock
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Unlock Release the lock of the operation from the system menu
Partial Lock Lock the operation from the system menu
Lock Lock the operation from

[subaro]

Also, tried to enter service mode (manual says 10871087) but service mode did not come up

maybe the system menu is locked out. check with the below sequences and see.
1087 1087 gets you into service mode.

To update the above. I think you have to press the status job cancel button first and from that screen then the 1087 1087.