Hello....... I just new in this brand.
I have trouble print quality in Kyocera Km 4050. The toner to low. I need help how to up the toner level... thanks before..
Thanks: 0
Likes: 0
Dislikes: 0
Print quality
Hello....... I just new in this brand.
I have trouble print quality in Kyocera Km 4050. The toner to low. I need help how to up the toner level... thanks before..
If you mean the prints are too faint, you need to do a developer refresh to start with. This is maintenance mode item 130.
Sent from my iPhone using Tapatalk
Are you sure it's low toner? You could have a problem with the transfer roller if you have light copies and prints.Originally Posted by dirham
What happened to your previous post?
My answer remains the same. The KM-4050 is a moncomponent developing MFP. Toner density is not an issue. Either you have toner or you don't.
If you have some sort of an image quality issue, you might post a scan or photo of the image quality problem. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I know right... Low toner... Put one in
Sent from my iPhone using Tapatalk
Posting Permissions
Reply With Quote
Bookmarks