DSC_2555.jpg
I can't close the left door, the right lock is very near while the left lock is very far, and the gear of the transfer roller can't be fixed on the gear of the drum.
Please help...
DSC_2555.jpg
I can't close the left door, the right lock is very near while the left lock is very far, and the gear of the transfer roller can't be fixed on the gear of the drum.
Please help...
This only have I found:
God created mankind upright,
but they have gone in search of many schemes.
Do you have a broken transfer bushing or missing rear transfer spring? Also check the drive coupler at the top of the vertical path section. Does it close properly without the transfer assy? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
On the very top of the door is the paper guide unit. It is white with lots of teeth. on the left of this guide is a spring with a white plastic piece that does not sit right when you close the door. remove this unit, a screw on either side and lift it out. close the door and check if closing properly. sometimes it can be reparied if you can
figure out why or just replace it.
This only have I found:
God created mankind upright,
but they have gone in search of many schemes.
In that case, remove the drum and then close the door and see what happens. The transfer roller assy is very simple and if both springs are in place on either side of the transfer roller, then you just have to place it on the frame and slide it to the left [rear of the machine ] for it to lock in place.
If still not working, then remove all the parts, that is the tranfer roller frame assy, middle feed and reassemble.
Only you can figure out this, as we don't have a visual of what is going on there.
Only other thing to think of there, is if the drum protection cover assy is not moving properly and causing obstruction. check if it retracts when you open and close the door.
Last edited by subaro; 12-19-2015 at 02:34 PM.
Last edited by eliaso; 12-20-2015 at 05:35 PM.
This only have I found:
God created mankind upright,
but they have gone in search of many schemes.
Hi
the problem is solved, it was so easy, the separation black gear on the right side wasn't in it's place .
It's the first time I see this copier, nice engineering .
thanks for all .
Last edited by eliaso; 12-21-2015 at 09:50 AM.
This only have I found:
God created mankind upright,
but they have gone in search of many schemes.
Could you give a more precise description of the fix, as your reply does not make sense, to me anyhow. where is this separation gear, it is actually on the transfer roller.. when you are referring to the right side, is it to the back side of the machine when standing on front of the machine. please explain as others may have this problem and not knowing where to look.
Edit::
Looking at a transfer roller at the shop, i see now your transfer roller was installed incorrectly in the frame of the transfer roller housing. [your pic ]
the white plastic bushing next to the black gear on the transfer roller was in the reverse order and in the wrong position.
Last edited by subaro; 12-21-2015 at 02:11 PM.
Bookmarks