Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: KYOCERA M2030DN

  1. #1
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Question KYOCERA M2030DN

    Hello ..we have error code C2000 in KYOCERA M2030DN ..l controlled all parts ...this machine is news .....any idea ?
    BEST TECHNICIAN . NICE PEOPLE .

  2. #2
    SanDiegoCopierRepair.com 1,000+ Posts
    KYOCERA M2030DN

    blazebusiness's Avatar
    Join Date
    Apr 2010
    Location
    From NY--- live in San Diego , Ca.
    Posts
    1,248
    Rep Power
    51

    Re: KYOCERA M2030DN

    Quote Originally Posted by zaza View Post
    Hello ..we have error code C2000 in KYOCERA M2030DN ..l controlled all parts ...this machine is news .....any idea ?
    Error code C2000 is main motor not turning properly. Something is tight or not spinning freely loading down the drive motor. Check each component one by one ie: fuser/dv units/drums to see if they are binding.
    Anything can be made to work if you fiddle with it long enough- San Diego Copier Repair.com

  3. #3
    Senior Tech 100+ Posts daveh12's Avatar
    Join Date
    Jul 2012
    Posts
    157
    Rep Power
    25

    Re: KYOCERA M2030DN

    I've seen fusers seize up on this model long before they should. No option but to replace.


    Sent from my iPhone using Tapatalk

  4. #4
    MECANOGRAPHE 1,000+ Posts zaza's Avatar
    Join Date
    Mar 2008
    Location
    ALGERIA
    Posts
    1,095
    Rep Power
    48

    Exclamation Re: KYOCERA M2030DN

    hello again ..l try controlled all parts of this mfp ..all is good ...fuser parts ..develop parts ...toner parts ...laser parts ...also l enter simulation ( U21 ) but unfortunate any solution ..pls any idea !
    BEST TECHNICIAN . NICE PEOPLE .

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Nov 2009
    Posts
    131
    Rep Power
    31

    Re: KYOCERA M2030DN

    Quote Originally Posted by blazebusiness View Post
    Error code C2000 is main motor not turning properly. Something is tight or not spinning freely loading down the drive motor. Check each component one by one ie: fuser/dv units/drums to see if they are binding.

    hi,

    check the drum contact on the right side.
    do you hear a strange noise?
    if yes, check visually and you will mostlikely see that the contact mass of the drum if not in proper position.
    bent the contact and the machine will work properly.

    please feedback.

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    368
    Rep Power
    25

    Re: KYOCERA M2030DN

    Pull the drum unit out and turn it by hand (press the gear on the right down), it must go smooth. Do the same for developer unit. If both are turning properly, than the right side has some mechanical factory problems (assuming the machine is new as you said). It could be the main motor or some of the gears around it.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here