Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: Tray

  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jan 2012
    Posts
    147
    Rep Power
    26

    Tray

    Hello

    I am a Toshiba tech mainly. One of my sales people sold a Kyocera TASKalfa 6500i that we received as a trade. It looks like it originally had a finisher attached. Unfortunately it does not have the finisher. I am looking to buy an exit tray for the machine. Is there anyone that might know of a part number or where I might buy one of these.

    Thank you in advance for any help.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Tray

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: Tray

    It uses (2) of the Copy Tray (D).
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 250+ Posts
    Tray

    blsquires's Avatar
    Join Date
    Nov 2008
    Location
    perth
    Posts
    343
    Rep Power
    44

    Re: Tray

    the good news is kyocera do sell an exit tray for this model .we have bought them in the past but i cant remember the part number or find it in the parts manual.

  4. #4
    Senior Tech 250+ Posts
    Tray

    blsquires's Avatar
    Join Date
    Nov 2008
    Location
    perth
    Posts
    343
    Rep Power
    44

    Re: Tray

    sorry blackcat in-between looking at the question then looking for the part number you had already answered his question .

  5. #5
    Master Of The Obvious 10,000+ Posts
    Tray

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,469
    Rep Power
    463

    Re: Tray

    I know there must be a supply number 1702.... something something, but my release bulletin is out in the car. Ok I confess, I'm lazy. =^..^=

    Here it is: 1902LF0UN1
    On some of the earlier Alphard bulletins forgot to include the exit tray.

    Like this: Amazon.com: Kyocera Copy Tray (B) x 2 Unit, 1902LF0UN1: Computers & Accessories

    Apparently Copy Tray (D) and Copy Tray (B) are interchangeable, depending on where you look, they both use the same supply number. =^..^=
    Last edited by blackcat4866; 02-08-2016 at 11:41 PM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here