CF010 Ecosys 2035dn

[osmani]

Hi every one,
I am coming across code CF010 on quite a few numbers of Ecosys 2035dn. Have tried upgrading firmware, but of no use. Any suggestion shall be welcome.

[wragsdale]

Well, CF010 on the Falcon III is Main PWB Checksum Error. Communication error between panel and main controller.

I have yet to see it on this series but it's likely the code is at least relevant. I'd suggest checking all harnesses/connectors (especially panel and main pwb) and reseating DIMMs.

[osmani]

This problem is rectified by replacing the control card. What is bothering is that it is occurring regularly. The ratio is almost 25%.replacing control pwb is costly.

[Blizzoo]

Had the same problem occurring after a power break,CF010 and CF000, main controller was changed under warranty, luckily

[aborad]

Had the same problem occurring after a power break,CF010 and CF000, main controller was changed under warranty, luckily

Hi sir,

Have you find any alternate way to resolve this problem.I have replaced almost 6 number of Main Controller and it cost me a lot.

[osmani]

Hi sir,

Have you find any alternate way to resolve this problem.I have replaced almost 6 number of Main Controller and it cost me a lot.

New firmware is available. Update on all existing mc.
The issue has been resolved.

[aborad]

New firmware is available. Update on all existing mc.
The issue has been resolved.

what to do with faulty main control ?

[osmani]

what to do with faulty main control ?

Has to be replaced as far as I know.

[salmisaid9]

give me firmware print kyosera 2030dn cf010 plz

[Phil B.]

give me firmware print kyosera 2030dn cf010 plz

this is a dead thread of 3 years

firmware is meant for trained techs only

your discussion of such a topic is in violation of #5 forum rules. you might want to review the rules.