Hi every one,
I am coming across code CF010 on quite a few numbers of Ecosys 2035dn. Have tried upgrading firmware, but of no use. Any suggestion shall be welcome.
Hi every one,
I am coming across code CF010 on quite a few numbers of Ecosys 2035dn. Have tried upgrading firmware, but of no use. Any suggestion shall be welcome.
Well, CF010 on the Falcon III is Main PWB Checksum Error. Communication error between panel and main controller.
I have yet to see it on this series but it's likely the code is at least relevant. I'd suggest checking all harnesses/connectors (especially panel and main pwb) and reseating DIMMs.
This problem is rectified by replacing the control card. What is bothering is that it is occurring regularly. The ratio is almost 25%.replacing control pwb is costly.
Had the same problem occurring after a power break,CF010 and CF000, main controller was changed under warranty, luckily
Defects are simple, our mind is complicated
give me firmware print kyosera 2030dn cf010 plz
Bookmarks