MP/BYPASS TRAY ISSUE.

**bollard** · 05-11-2016

300GSM cardstock will not feed mp tray (settings been played with etc.)

This has worked up until today , rollers changed to no avail ,feeds everything else but not the 300gsm which is at the peak of the spec for the mp tray.
Has anyone had this issue ? any model ?
Machine in question Taskalfa 7551ci.

**Tonerkiller** · 05-11-2016

Will it feed thinner paper? Is the bypass set to auto/inch.

**bollard** · 05-11-2016

Originally Posted by Tonerkiller

Will it feed thinner paper? Is the bypass set to auto/inch.

Yes all set correct.

**habik** · 05-11-2016

Does it feed at all? Couple of cm? Clutch?

Trimmed mylar once to help feeding.
Have to check if I still have the picture

Sent from my GT-I9300 using Tapatalk

**bollard** · 05-11-2016

Originally Posted by habik

Does it feed at all? Couple of cm? Clutch?

Trimmed mylar once to help feeding.
Have to check if I still have the picture

Sent from my GT-I9300 using Tapatalk

Next move is clutch possibly motor as well.