Just wonerdering if the fax cards on these machines plug and play? Going from one machine with one to another one without.
Thanks: 0
Likes: 0
Dislikes: 0
Just wonerdering if the fax cards on these machines plug and play? Going from one machine with one to another one without.
Originally Posted by tech28
It can be moved just remember to move the fax card and the fax DIMM. When you turn on the copier you will get a C06XX code. Run DIMM memory clear to reset. When you go into Maint Mode after the code it will be the only Maint Mode you can access above MM600. I can't remember the exact MM number off the top of my head.
Sim 617. Card must be mounted in the new machine when doing this.
Fax dimm on machine? If no dimm, no install I take it?
One of the DIMMs on the Main PWB will be labelled "FAX". If you want your fax option to work, that
DIMM has to go with the fax card, and the memory clear of course. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
The fax pwb can only be used on machines that support them, usually it's within a specific series. They cannot be used in any kyocera machine that supports an optional fax pwb. There are s type v type ect. Check the machine specification documents or kyocera Bulletin1 for the machine in question.
THE ONLY THING FOR EVIL TO TRIUMPH IS FOR GOOD MEN TO DO NOTHING..........edmund burke
Thank You guys for the information. Much appreciated.
Posting Permissions
Reply With Quote
Bookmarks