Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts COPYDOCAZ's Avatar
    Join Date
    Mar 2015
    Location
    Chandler/Gilbert
    Posts
    110
    Rep Power
    20

    Exclamation default exit tray ajustment

    KM 2550 OLDIE........ Replaced the finisher exit tray for customer set the default exit tray for "FINISHER" but the paper comes out in the regular output bin inside. Curious... guess i should have checked if the staple functions worked but it sees the finisher for sure.

  2. #2
    Master Of The Obvious 10,000+ Posts
    default exit tray ajustment

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: default exit tray ajustment

    If there is an error stored for the finisher, the finisher will be isolated, regardless of what settings you select. I think I would start with a U906 partial reset. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here