Hi All
I have the .CAPT file to reset the colour alignment however struggling to send it . . .
How is this done?
I have tried copying the .CAPT file to the root directory of a USB drive, plug in, then start the printer but it doesnt see it. . . .
Hi All
I have the .CAPT file to reset the colour alignment however struggling to send it . . .
How is this done?
I have tried copying the .CAPT file to the root directory of a USB drive, plug in, then start the printer but it doesnt see it. . . .
Is the file showing in the USB memory menu?
Hi have you tried a memory card inserted in the main logic board with the capt file on it?
This may work..
network the printer and get its ip address.
in the folder where the capt file is hold down shift and at the same time right click this makes the option "open command window here" appear.
In command window type
ftp ip address of printer
eg
ftp 10.10.10.10
Next press the enter key twice (no password required):
type
put 2HL_CLRreg_init.capt
or whatever the name of your capt file is
and press enter
When you think you have made a procedure idiot proof your company employs a better idiot.
You can also use Internet Explorer or just Windows file Explorer and type in ftp://ip address of printer. You should see 4 folders lp1-lp4, simply copy the file to one of the folders.
Bookmarks