Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Technician
    Join Date
    Oct 2013
    Location
    St. Clair, Michigan
    Posts
    11
    Rep Power
    22

    KM-1820 Registration Problem

    So I have a KM-1820 thats getting a jam 40 and registration is very random. I cleaned the stickyfoam pads on solenoids off and had no effect. Installed new feed and registration clutch and solenoids as well as new feed tire for tray. Beginning to think the registration flag/sensor is bad.

    Any ideas?

  2. #2
    Service Manager 1,000+ Posts
    KM-1820 Registration Problem


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: KM-1820 Registration Problem

    It's always the registration solenoid, common problem. crazy.

  3. #3
    Technician
    Join Date
    Oct 2013
    Location
    St. Clair, Michigan
    Posts
    11
    Rep Power
    22

    Re: KM-1820 Registration Problem

    Quote Originally Posted by JR2ALTA View Post
    It's always the registration solenoid, common problem. crazy.
    I replaced the registration solenoid. Still happening.

  4. #4
    Service Manager 1,000+ Posts
    KM-1820 Registration Problem


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: KM-1820 Registration Problem

    Quote Originally Posted by narnol02 View Post
    I replaced the registration solenoid. Still happening.
    I know. That's why it's crazy.sorry don't have an answer

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    368
    Rep Power
    25

    Re: KM-1820 Registration Problem

    Replace the engine pwb if you can find one.

  6. #6
    Senior Tech 250+ Posts
    KM-1820 Registration Problem

    Ctl-Alt-Del's Avatar
    Join Date
    Jul 2006
    Posts
    431
    Rep Power
    47

    Re: KM-1820 Registration Problem

    Quote Originally Posted by narnol02 View Post
    So I have a KM-1820 thats getting a jam 40 and registration is very random. I cleaned the stickyfoam pads on solenoids off and had no effect. Installed new feed and registration clutch and solenoids as well as new feed tire for tray. Beginning to think the registration flag/sensor is bad.

    Any ideas?
    Whats the page count? Does that machine have a hard rubber reg roller, is the center of the roller worn thinner than the outsides?

  7. #7
    Master Of The Obvious 10,000+ Posts
    KM-1820 Registration Problem

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: KM-1820 Registration Problem

    I seem to recall something about registration bushings breaking, and being rather unpleasant to replace. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here