Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    KM-5050 CFA10 error after boot


    Join Date
    Apr 2014
    Posts
    50
    Rep Power
    21

    Question KM-5050 CFA10 error after boot

    believe that this is a hard drive error but not sure as it is reporting an error on the hot plug??? what to do with this error..... any help is appreicated

  2. #2
    Master Of The Obvious 10,000+ Posts
    KM-5050 CFA10 error after boot

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: KM-5050 CFA10 error after boot

    I think I'd replace the HDD. =^.^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts
    KM-5050 CFA10 error after boot


    Join Date
    Apr 2014
    Posts
    50
    Rep Power
    21

    Re: KM-5050 CFA10 error after boot

    Thanks for the reply!! I will get that done

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Jul 2013
    Location
    lagos state
    Posts
    82
    Rep Power
    22

    Re: KM-5050 CFA10 error after boot

    Did you format the hard disc? if no, enter the program use 24 to format it. hope it will also help. good luck

  5. #5
    Trusted Tech 50+ Posts
    KM-5050 CFA10 error after boot


    Join Date
    Apr 2014
    Posts
    50
    Rep Power
    21

    Re: KM-5050 CFA10 error after boot

    A new hard drive fixed the issue Thanks For your Help!

    hard drive was formatted on boot up by the copier. I did still re format after that but don't think it was necessary.

  6. #6
    Master Of The Obvious 10,000+ Posts
    KM-5050 CFA10 error after boot

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: KM-5050 CFA10 error after boot

    It does run immediately after the new HDD is installed, but I format it anyway.

    Congratulations on your success. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here