Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 250+ Posts Athlontini's Avatar
    Join Date
    Jun 2012
    Posts
    267
    Rep Power
    29

    Opinions on the TA 3252ci series?

    First time training outside of the Ricoh brand, and I'm learning the 2552-6052ci series. Seems so far like a nice machine, easy maintenance, but is there anything the forum-going public should know about these boxes? I've heard about the waste toner bottles getting damaged when left inside the machines during transport. What are everyone's opinions?

  2. #2
    Owner/Service Manager 1,000+ Posts
    Opinions on the TA 3252ci series?

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: Opinions on the TA 3252ci series?

    No problems so far. They just released a bulletin for noise in the ext section. That's the first one as far as I know.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  3. #3
    Senior Tech 100+ Posts daveh12's Avatar
    Join Date
    Jul 2012
    Posts
    157
    Rep Power
    25

    Re: Opinions on the TA 3252ci series?

    There's another bulletin to change the preset count for feed rollers in cassette 1 and 2 in M mode U250 from 150,000 to 300,000. So it's not looking for rollers prematurely. As for common problems with the range, time will tell.


    Sent from my iPhone using Tapatalk

  4. #4
    Senior Tech 250+ Posts DavePo's Avatar
    Join Date
    Jul 2008
    Location
    PA
    Posts
    300
    Rep Power
    36

    Re: Opinions on the TA 3252ci series?

    Have had a magenta developer unit, a yellow developer unit and a black developer unit fail. The magenta happened at initial power up, a seal was pulled out of developer unit and into drum unit. The black unit failed at about a thousand copies and lost coverage on rear side. The Yellow unit the latch for the mag roller failed at setup and would not let mag roller engage the drum. The yellow and black units where from same machine. Like the box however.

  5. #5
    Trusted Tech 250+ Posts Athlontini's Avatar
    Join Date
    Jun 2012
    Posts
    267
    Rep Power
    29

    Re: Opinions on the TA 3252ci series?

    Yeah, I suppose they're too new to really tell. Well, I will also be learning the 7052ci, so if anyone has any useful advice on working on that box, it'd be welcome in this thread too.

  6. #6
    Senior Tech 100+ Posts The_Murph's Avatar
    Join Date
    Mar 2016
    Location
    Erie, CO
    Posts
    96
    Rep Power
    17

    Re: Opinions on the TA 3252ci series?

    I'm impressed so far, did the factory training and found it worth disassembling and discussing the way the waste system works (see http://www.copytechnet.com/forums/ky...new-boxes.html) otherwise I've seen a failed dv (y) caused by mag roller cam broken. I think its an incredible line at this point.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here