Results 1 to 9 of 9
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Dec 2009
    Posts
    83
    Rep Power
    16

    Kyocear 500ci Platen glass copy

    [tach]scan0001.jpgscan0002.jpghello all, the bottom of the copy is darker when i make copy from the glass. The left picture is black and white, the right one is color copy. Any help would be great. Thank you.

    Attached Files Attached Files

  2. #2
    Technician
    Join Date
    Nov 2011
    Location
    Warrnambool
    Posts
    35
    Rep Power
    12

    Re: Kyocear 500ci Platen glass copy

    Have seen the little black plastic pieces that the scanner carriage runs on, break and cause the mirrors to lose focus and cause a wavy image on the page. There's 4 of them, one in each corner. Maybe ones broken and when the carriage moves it's dragging a bit and causing the mirrors to change angle.


  3. #3
    Technician
    Join Date
    Aug 2014
    Location
    port huron,michgan
    Posts
    31
    Rep Power
    7

    Re: Kyocear 500ci Platen glass copy

    If the prints and the copies from the adf are good, then
    I would try setting the target with test chart P/N: 302FZ56990 using code u425 ; then run the chart on the glass using u411.



  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Dec 2009
    Posts
    83
    Rep Power
    16

    Re: Kyocear 500ci Platen glass copy

    Thank you everyone. I will give those a try.


  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Dec 2009
    Posts
    83
    Rep Power
    16

    Re: Kyocear 500ci Platen glass copy

    Thank you for your help. Yes it is the black plastic bushing on the optics itself. It was so small I missed it.


  6. #6
    Technician
    Join Date
    Oct 2012
    Location
    Eagle Point
    Posts
    17
    Rep Power
    11

    Re: Kyocear 500ci Platen glass copy

    Please do not take offense, but did you clean the optics?


  7. #7
    Master Of The Obvious 10,000+ Posts
    Kyocear 500ci Platen glass copy

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,198
    Rep Power
    244

    Re: Kyocear 500ci Platen glass copy

    Congratulations on your success. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  8. #8
    Technician
    Join Date
    Nov 2011
    Location
    Warrnambool
    Posts
    35
    Rep Power
    12

    Re: Kyocear 500ci Platen glass copy

    It's a real bugger of a one to find. It took me close to 2 hours the first time I saw this happen. In the last 4 years I've had it happen maybe half a dozen times. Still can't work out how they break.


  9. #9
    Junior Member
    Join Date
    Jun 2017
    Posts
    1
    Rep Power
    0

    Re: Kyocear 500ci Platen glass copy

    Hi,
    I need of P/N: 302FZ56990 to calibrate my Kyocera FS3040.
    I was change a scanner and now I can't copy in Auto Density, only manual density.
    Help me.

    Regards



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here