Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts 1stcavvet's Avatar
    Join Date
    Apr 2015
    Location
    Sterling Heights, Michigan
    Posts
    146
    Post Thanks / Like
    Rep Power
    6

    kyocera FS 6530 new machine

    I installed this machine last week and didn't notice it at the time. The customer says that the ADF seems really slow, I'm going out to see , Does anyone have any ideas on settings to look for, something that would be the reason for it to seem slow. DPI settings , adf looking in color instead of B/W. any ideas would help Thanks


  2. #2
    Trusted Tech 50+ Posts The_Murph's Avatar
    Join Date
    Mar 2016
    Location
    Erie, CO
    Posts
    54
    Post Thanks / Like
    Rep Power
    3

    Re: kyocera FS 6530 new machine

    I would pull the specs for the FS-6530 and compare the spec speed to the actual speed. It could be that the customer is just used to a faster scanning adf. I wouldn't assume that there's a problem without getting eyes on it first. That's not exactly the Corvette of doc feeders...

    If you phrase your inquiry properly, you will get the answers you seek...

    Good Luck ... You'll need it! HAHAHA!

    ~Big Dan~

  3. #3
    Senior Tech 100+ Posts 1stcavvet's Avatar
    Join Date
    Apr 2015
    Location
    Sterling Heights, Michigan
    Posts
    146
    Post Thanks / Like
    Rep Power
    6

    Re: kyocera FS 6530 new machine

    I figured I would look @ dpi settings and check the send settings make sure it's looking at TEXT b/w if the dpi is high it would slow down to be read better. I think, that's why I was asking. customer sounded a little sad ----- I said I would check some things Thanks


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here