HI ! i have small problem here is halfprint is produce on and off when doing copying.But of course is not all the time ,my firmware version 0.16,your help is appreciated. THankYou.[Falcon 3 problem]
You need to be more specific with your description of the problem. What kind of "half copies" are you getting: half the page is blank or is the image shifted half way off of the page? Off the glass, through the DF or both? All drawers and sizes?Originally Posted by leaw heng keong
HI ! i have small problem here is halfprint is produce on and off when doing copying.But of course is not all the time ,my firmware version 0.16,your help is appreciated. THankYou.[Falcon 3 problem]
--
Handle every stressful situation like a dog would,
Piss on it and walk away.
I am unable to understand the problem.
New firmware today version 2.20 08/08/08. The engine firmware updated to version 13.001 =^..^=
RTFM
Do yourself a favor. Buy a manual and read up on your problem before posting. I enjoy helping those that are willing to help themselves. =^..^=
What i mean here is the print out is cut off which is not caused DF or paper tray.Thankyou.Our latest firmware here is 17.00 i not very sure whether is it the same.
Perhaps it's a size detection problem, I have attached the tech bulletin.
Posting Permissions 
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks