Thanks:
0
Dislikes:
0
-
Technician
- Rep Power
- 24
TA 356ci Lines on first prints
Hi Guys
Having a problem with lines on a TA 356ci
I have attached an example TA365ci Example.pdf
Really bad on first print out then gets better,
We have pulled the machine to workshop for investigating and are getting the same issue here
This is on a virtually new machine so far we have changed...
Primary Transfer Belt
Secondary Transfer Roller
All Drums
Update FW
We are in the process of changing the LSU as i type (will update)
The marks align perfectly with ID sensors , it looks like the transfer belt is not cleaning the id patches off .
Very Strange one this and this is a first for us so hoping some of you guys have experienced this .
Mossup
-
Trusted Tech
50+ Posts
- Rep Power
- 28
Re: TA 356ci Lines on first prints
May I ask why you are changing so many parts up front? It is a new machine and looks as a transfer cleaning issue. I would look into that area a bit more before throwing any more parts at it.
-
Re: TA 356ci Lines on first prints
You're doing way too much work. Check the two springs that make connection with the two points on the primary belt. These charge the metal roller inside the primary cleaning unit to pull the toner off the belt. I'm guessing you're also getting error codes like C7620. I had an M6525cidn that was doing the same thing. The spring was evidently missing from the factory.
IMG_3440.JPGIMG_3442.JPG
-
Technician
- Rep Power
- 24
Re: TA 356ci Lines on first prints
Ago
tmaged
thanks for that i will check springs inside the machine , we haven't had any error codes mind.
We have pulled the machine to the workshop and can use the Showroom machine to quickly swap parts over, its very convenient.
This is a new machine so can be sent back if needed but i would like to know whats causing the issue as i have never seen this before.
-
Technician
- Rep Power
- 24
Re: TA 356ci Lines on first prints
Fixed
tmaged you were bang on with the spring.
Both springs were present but the right hand one came away missing the transfer contact.
Unusual symptom but like you said the bias is to aid cleaning and therefore not cleaning the ID patches efficiently.
Thank you so much for your help
Mossup
-
Re: TA 356ci Lines on first prints
Glad that fixed it for you. It took me a little bit of looking at the M6525cidn to figure out exactly how it worked & what it was trying to accomplish.
We're coming to London this summer for vacation, you can buy me a drink.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks