I am having an issue when attempting to install the MAC driver V3.3 on a new install. I downloaded the latest driver from the copystar site, unzipped the file then ran the package installer. Then I go to the sys preferences and printers. Click on add printer, IP method, enter the machine IP. At this point the driver then looks up the equipment using the IP, self-populates the "Use This Driver" field with appropriate driver [CS 6052ci (KPDL)]. This tells me that the driver and the copier are talking with the MAC in question on some level. Then it should be a matter of clicking "Add" then its a short 5-10 seconds til the next screen should appear to complete the install, however, this is where the installer lags and throws up the color wheel. I waited over 45 minutes at one point to see if it would error or complete. The only way to stop the installer is to reboot the MAC. I tried uninstalling and removing all other info then downloading fresh. I've tried using IPP, LPD, HP jetdirect socket. I have installed this same driver on MAC only environments with no problems, Kyo says it seems like equipment and driver are operating fine. Any thoughts?