Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Apr 2012
    Location
    lusaka zambia
    Posts
    98
    Rep Power
    12

    system error F000

    i have a kyocera 4501i at first it had a white screen after replacing the screen it is displaying system error F000 what could be the problem?


  2. #2
    Master Of The Obvious 10,000+ Posts
    system error F000

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,394
    Rep Power
    248

    Re: system error F000

    Dis you re-load the firmware?

    On kyocera machines the firmware for each board resides right there on that board. So let's say you you remove an operation panel with version 2.0 firmware, then install an operation panel with version 3.0 firmware. You've got a firmware level conflict. Just re-loading the firmware any time you change a board is a good policy.

    And please don't ask me for the firmware. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Apr 2012
    Location
    lusaka zambia
    Posts
    98
    Rep Power
    12

    Re: system error F000

    i have tried to reload firmware but its not responding its just displaying system error


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here