i have a kyocera 4501i at first it had a white screen after replacing the screen it is displaying system error F000 what could be the problem?
i have a kyocera 4501i at first it had a white screen after replacing the screen it is displaying system error F000 what could be the problem?
Dis you re-load the firmware?
On kyocera machines the firmware for each board resides right there on that board. So let's say you you remove an operation panel with version 2.0 firmware, then install an operation panel with version 3.0 firmware. You've got a firmware level conflict. Just re-loading the firmware any time you change a board is a good policy.
And please don't ask me for the firmware. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
i have tried to reload firmware but its not responding its just displaying system error
Bookmarks