Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: KM2550

  1. #1
    Field Supervisor 500+ Posts tcypy1961's Avatar
    Join Date
    Feb 2009
    Location
    Pensacola, FL
    Posts
    771
    Rep Power
    38

    KM2550

    Registration on top drawer is off consistently feeding too fast, 2nd drawer is correct. Fuser is also causing a cq issue. Could there be a relationship between the fuser and the registration problem???
    Thanks!!!

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Oct 2012
    Posts
    653
    Rep Power
    35

    Re: KM2550

    Is the paper weight set properly?

  3. #3
    Master Of The Obvious 10,000+ Posts
    KM2550

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: KM2550

    Do you have any samples marked with the feed direction? Have you looked at tray adjustments and image adjustments? That's what I would do. =^..^=
    Last edited by blackcat4866; 05-11-2017 at 01:26 AM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Technician
    KM2550


    Join Date
    Jul 2009
    Location
    Central NJ, USA
    Posts
    41
    Rep Power
    30

    Re: KM2550

    I have replaced many paper feed clutches on this series (1620/1650/2050/2550). Check Fuser Roller for contamination, order Fuser Right Assy or entire Fuser Assy to fix.

  5. #5
    Field Supervisor 500+ Posts tcypy1961's Avatar
    Join Date
    Feb 2009
    Location
    Pensacola, FL
    Posts
    771
    Rep Power
    38

    Re: KM2550

    Thanks for the replies!!!! This copier was used in another location where these problems were not occurring. What I'm really asking is could there be a connection between the fuser and this problem with registration; however the fact that it only happens with the top drawer will have me ck the paper weight, all other settings are accurate.
    Thanks again!!!

  6. #6
    Field Supervisor 500+ Posts
    KM2550


    Join Date
    Oct 2010
    Posts
    815
    Rep Power
    45

    Re: KM2550

    No. The paper registers to the image well before the fuser.

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Oct 2012
    Location
    Eagle Point
    Posts
    81
    Rep Power
    25

    Re: KM2550

    One thing that I used to see in some of the old Canons is the sensor flag for the number one drawer would wear down and cause the registration to be off.
    Some techs would just adjust the registration not caring that it was only cassette one that was the problem.
    After having been adjusted the machine would then be off on all the other cassettes and sometimes cause jamming due to the
    registration being so far off, sometimes in the fuser causing it to be soiled and or damaged.
    FWIW

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here