Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    The Republic of Pineland
    Rep Power

    SRDF-2 part issue

    I have a customer with an old 3035 with an srdf-2 on top. The back part of the top left cover broke and I found a part manual and ordered it. Part number 3AL04120. The new lid came in and it wasn't til I tried putting it on the machine that I saw it was different. It is almost the same but the edge on top is much thinner than the one that came off. We went to a company that sells KM parts. They have researched and double checked and can find no revised part number or change. Is this something anyone has seen? The SRDF-2 is dated 2006, if that matters.
    The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

  2. #2
    Junior Member
    Join Date
    Dec 2017
    East Lyme
    Rep Power

    Re: SRDF-2 part issue

    Did you come to a resolution on this problem? Mine also came in with the same problem, the lid is thinner. Do you have another part # other than, Kyocera Mita 3AL04120. Any help you can lend to resolving this issue would be appreciated.

    Many thanks


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here