Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 250+ Posts n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    439
    Rep Power
    0

    ECOSYS M3540idn not pulling single sheets from the bypass

    i got a m3540idn that works great even from the bypass save every once in a while it will not be able to detect single sheets...
    the tray will snap up... the paperfeed roller will try to pull but will not be able to get traction. the tray snaps up and down a couple of times then reports a jam... The roller looks new... I am replacing the bypass paperfeed kit... I am checking if there is anything else I should take a look at... as always this is from the desktop family of kyocera mfps... so anyone with experience on these... feel free to chime in...

    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

  2. #2
    Trusted Tech 50+ Posts aktasson's Avatar
    Join Date
    Feb 2017
    Location
    Frankfurt am Main
    Posts
    80
    Rep Power
    2

    Re: ECOSYS M3540idn not pulling single sheets from the bypass

    First of all i would say - firmware update first. Actual version is 06.07.0010. Do you have the e-log file on usb stick? On the e-log printout have a look to the jam errors and codes.


  3. #3
    Senior Tech 250+ Posts n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    439
    Rep Power
    0

    Re: ECOSYS M3540idn not pulling single sheets from the bypass

    nope but I can get the firmware... I also have the paperfeed kit for the bypass on order... along with the cork strip that sits on the tray...

    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    314
    Rep Power
    12

    Re: ECOSYS M3540idn not pulling single sheets from the bypass

    You will need to replace entire drive feed assy.


  5. #5
    Senior Tech 250+ Posts n25an's Avatar
    Join Date
    Jul 2008
    Location
    miami, florida
    Posts
    439
    Rep Power
    0

    Re: ECOSYS M3540idn not pulling single sheets from the bypass

    thankfully never got that far... I replaced the bypass feed rollers and separation pad... while doing that I realized something... the springs could be weak... so I raised the base for the springs that supported the flap that goes up and down... spring on left and right... by doing a macgyverism... I used a piece of paper to elevate the springs a bit... after that it worked like a charm... the roller out was a bastard... took out the whole front cover... never want to do that again...

    Quote Originally Posted by Kyo fan View Post
    You will need to replace entire drive feed assy.


    Sad To Say I Don't Have a Life
    I do this stuff on the weekends too

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here