Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21
  1. #11
    Service Manager 1,000+ Posts
    3550idn Frame busted


    Join Date
    Feb 2010
    Posts
    1,228
    Rep Power
    37

    Re: 3550idn Frame busted

    Correct. I meant to include that in my ramblings.


  2. #12
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    621
    Rep Power
    32

    Re: 3550idn Frame busted

    We have had luck just using the paper tray from the 3540 it just has the spring lift in the tray and eliminates the need for the lift gear unit, it stops the clicking and works just fine


  3. #13
    Junior Member
    Join Date
    Mar 2016
    Posts
    5
    Rep Power
    0

    Re: 3550idn Frame busted

    Does anyone happen to have bulletin 2LV-0032? Apparently it shows the steps to replace the cassette guide in a FS-4200.


  4. #14
    Master Of The Obvious 10,000+ Posts
    3550idn Frame busted

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    16,152
    Rep Power
    264

    Re: 3550idn Frame busted

    It's surprisingly not that hard to get out:

    Remove all the consumables (you'll be flipping the machine sideways, upside-down, every which way)
    Remove side covers
    Remove paper tray, bottom crossmembers, paper pickup unit, duplex guides
    From right side remove three screws holding inner right cassette rail
    It will come out with some cursing at this point.

    =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #15
    Field Supervisor 500+ Posts
    Join Date
    Oct 2010
    Posts
    536
    Rep Power
    25

    Re: 3550idn Frame busted

    Quote Originally Posted by blackcat4866 View Post
    It's surprisingly not that hard to get out:

    Remove all the consumables (you'll be flipping the machine sideways, upside-down, every which way)
    Remove side covers
    Remove paper tray, bottom crossmembers, paper pickup unit, duplex guides
    From right side remove three screws holding inner right cassette rail
    It will come out with some cursing at this point.

    =^..^=
    I told a customer that I would have to take their printer back to the shop for repairs. She asked if it was that bad off. I said "No, it's a minor issue but the part that needs to be replaced is buried deep in the printer and requires 25-30 cuss words to remove so we can't do it in the customer's office." She didn't even break eye contact. Just said "Ok".


  6. #16
    Junior Member
    Join Date
    Mar 2016
    Posts
    5
    Rep Power
    0

    Re: 3550idn Frame busted

    Quote Originally Posted by blackcat4866 View Post
    It's surprisingly not that hard to get out:

    Remove all the consumables (you'll be flipping the machine sideways, upside-down, every which way)
    Remove side covers
    Remove paper tray, bottom crossmembers, paper pickup unit, duplex guides
    From right side remove three screws holding inner right cassette rail
    It will come out with some cursing at this point.

    =^..^=
    Are the screws holding the inner rail accessed from the outside, or inside where the frame is? And thanks for your help.


  7. #17
    Trusted Tech 50+ Posts
    Join Date
    Apr 2017
    Posts
    98
    Rep Power
    3

    Re: 3550idn Frame busted

    it's been a while for me, but isn't there a gear that should be popped-off to make clearance for the unit to come out?


  8. #18
    Junior Member
    Join Date
    Mar 2016
    Posts
    5
    Rep Power
    0

    Re: 3550idn Frame busted

    Almost there, but for the life of me I can't get the rear door off!


  9. #19
    Junior Member
    Join Date
    Mar 2016
    Posts
    5
    Rep Power
    0

    Re: 3550idn Frame busted

    Finally got the door off


  10. #20
    Junior Member
    Join Date
    Mar 2016
    Posts
    5
    Rep Power
    0

    Re: 3550idn Frame busted

    And it's out.Thanks again for the help.

    Only used 20 cuss words so I have at least 10 left for reassembly.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here