Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member
    Join Date
    Sep 2016
    Posts
    7
    Rep Power
    0

    Ecosys FS2100DN fuser reset

    Anyone know how to reset a fuser error? There is nothing I can see in the manual!

    Thanks


  2. #2
    Service Manager 1,000+ Posts
    Ecosys FS2100DN fuser reset


    Join Date
    Feb 2010
    Posts
    1,086
    Rep Power
    32

    Re: Ecosys FS2100DN fuser reset

    There is none. Need to replace fuser for codes, then it will go away.


  3. #3
    Junior Member
    Join Date
    Sep 2016
    Posts
    7
    Rep Power
    0

    Re: Ecosys FS2100DN fuser reset

    Quote Originally Posted by JR2ALTA View Post
    There is none. Need to replace fuser for codes, then it will go away.
    Good stuff, thank you


  4. #4
    Master Of The Obvious 10,000+ Posts
    Ecosys FS2100DN fuser reset

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,404
    Rep Power
    249

    Re: Ecosys FS2100DN fuser reset

    It's very technical: Like most HP's just fix your fuser and power cycle, and the fuser code just goes away. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #5
    Junior Member
    Join Date
    Sep 2016
    Posts
    7
    Rep Power
    0

    Re: Ecosys FS2100DN fuser reset

    Quote Originally Posted by blackcat4866 View Post
    It's very technical: Like most HP's just fix your fuser and power cycle, and the fuser code just goes away. =^..^=
    I didn't want to go spending money on a new fuser without confirming whether there was a reset to try first.


  6. #6
    Junior Member
    Join Date
    Aug 2015
    Posts
    1
    Rep Power
    0

    Re: Ecosys FS2100DN fuser reset

    Hi.

    You can try the following using Printer Utility.

    !R! LFRE F,0;exit;


  7. #7
    Technician gtheflea's Avatar
    Join Date
    Jul 2017
    Location
    South Africa
    Posts
    13
    Rep Power
    1

    Re: Ecosys FS2100DN fuser reset

    Hi there.
    Might be a bit late, but here goes anyways.

    Fuser error on this range - there is no way to automatically reset this error (like U906). Had couple of those fuser errors in the past (ususally occured after a power failure or so). You can (as temp measure) remove the thermostat and reset it manually (shake it gently and listen if you hear any sound coming from it - it should have a sound. If nothing then you need to manually reset it (tap it quite hard on a hard surface with the dark side to the bottom (just dont bend or break the connectors)). The force will make it release.) You can then go ahead and order a thermostat (unless it is caused by something else like fuser lamp)(actually it is advised to test the lamp before disassembling the heat roller and so on)
    (I've been told it is best to replace the thermostat after its locked once - else you might return to reset it more frequently)(but i did a little experiment at a client and only reset it manually without replacing it - dunno if it was dangerous but it still worked for a long time)

    Hope this helps


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here