Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20
  1. #11
    Master Of The Obvious 10,000+ Posts
    Charge Roller Change (Finally !)

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,408
    Rep Power
    249

    Re: Charge Roller Change (Finally !)

    Quote Originally Posted by tmaged View Post
    If these things work like they're supposed to, you will only need to every 600k.
    Many of the older Lexmark printers had primary charge rollers that mounted inside the engine, separate from the imaging unit, and lasted the lifetime of the machine. So it is possible to make durable charge rollers, just not by Kyocera. =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  2. #12
    Service Manager 1,000+ Posts
    Charge Roller Change (Finally !)


    Join Date
    Feb 2010
    Posts
    1,089
    Rep Power
    32

    Re: Charge Roller Change (Finally !)

    The roller is a quantum leap from the grid/corona wire. I can handle some problems that can be fixed quickly. Kyocera is heads and shoulders above other models regarding logic codes, dimms, hdds and other non mechanical failures


  3. #13
    Technician
    Join Date
    May 2011
    Posts
    12
    Rep Power
    14

    Re: Charge Roller Change (Finally !)

    Quote Originally Posted by tmaged View Post
    We ordered an MC-8705 and it subbed out to an MC-8720. The new charge rollers have the updated glue to eliminate the bumps & a spiral cleaner to eliminate the lines.
    It only took them 6 years to fix it. Hopefully this does it. I asume the MC-6705 will be updated as well. I did notice they also did away with the gears in the end of the charge roller.
    Hello mate. can you please share link to the service bullettin. i need to convince a customer. i have access to the kyoceraextranet but cant find the bulletin.

    regards


  4. #14
    Service Manager 1,000+ Posts tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,198
    Rep Power
    33

    Re: Charge Roller Change (Finally !)

    Quote Originally Posted by temas View Post
    Hello mate. can you please share link to the service bullettin. i need to convince a customer. i have access to the kyoceraextranet but cant find the bulletin.

    regards
    PM me your address & I'll email it to you.

    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  5. #15
    Senior Tech 250+ Posts Geo's Avatar
    Join Date
    Nov 2010
    Posts
    355
    Rep Power
    18

    Re: Charge Roller Change (Finally !)

    Quote Originally Posted by tmaged View Post
    If these things work like they're supposed to, you will only need to every 600k.
    Now if they would only improve feed rollers life...I'm not greedy....300k min. per set would be a nice bare minimum...


  6. #16
    Technician
    Join Date
    May 2011
    Posts
    12
    Rep Power
    14

    Re: Charge Roller Change (Finally !)

    Quote Originally Posted by tmaged View Post
    PM me your address & I'll email it to you.

    Done! Thanks man!


  7. #17
    Senior Tech 100+ Posts ntbann's Avatar
    Join Date
    Jan 2012
    Location
    Port Huron
    Posts
    222
    Rep Power
    15

    Re: Charge Roller Change (Finally !)

    We use Minolta rollers. They last a lot longer.


  8. #18
    Senior Tech 250+ Posts Geo's Avatar
    Join Date
    Nov 2010
    Posts
    355
    Rep Power
    18

    Re: Charge Roller Change (Finally !)

    Quote Originally Posted by ntbann View Post
    We use Minolta rollers. They last a lot longer.
    If possible, can you provide Minolta part numbers and model numbers....Thanks much.


  9. #19
    Master Of The Obvious 10,000+ Posts
    Charge Roller Change (Finally !)

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,408
    Rep Power
    249

    Re: Charge Roller Change (Finally !)

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  10. #20
    Senior Tech 250+ Posts Geo's Avatar
    Join Date
    Nov 2010
    Posts
    355
    Rep Power
    18

    Re: Charge Roller Change (Finally !)

    Quote Originally Posted by blackcat4866 View Post
    Your going to make me do reading...Ohh Poo...


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here