If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
google <tap tap tap... > "high volume machines"
---------- google result ---------------
15,900,000 results
Date All Past 24 hour Past Week Past Month Language Only English
Region only from Australia
--------------------------------
15,900,000 pages...
Hang on while a grab a cuppa coffee....
Shouldn't take me long......
Maybe a couple of years .... lol...
Inauguration to the "AI cancel-culture" fraternity 1997...
•••••• •••[§]• |N | € | o | M | Δ | t | π | ¡ | x | •[§]••• ••••••
Good machine in general, here in Oz Kyo machines seem to eat fusers reliably.
If you have worked on Kyo previously you would know that MK kits MUST be replaced on time, and machines cleaned internally, they all tend to run a little dirty.
I would also like to know how you ger150k out of the feed rollers. I cant get 75k before they start jamming. that's why we started using the Konica rollers.
All I know is that it's some cheap Magtec stuff. It's a school after all.
The machines are run by students and they generally don't call in a jam or two. When I get around to clearing jam counts, there might be only a handful of misfeeds (<5). Clean them off a little bit and let them keep on trucking.
The difference between the previous rollers and the Alphard II pinch tab rollers was night and day for us.
Bookmarks