Thanks:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 0
kYO-6500I FUSER ERROR C6030
Cleared code, replaced fuser, engine pwb and fuser pwb, upgraded firmware. What else should i reset or replace, thanks for replys
-
Re: kYO-6500I FUSER ERROR C6030
-
Senior Tech
250+ Posts
- Rep Power
- 0
Re: kYO-6500I FUSER ERROR C6030
Originally Posted by
Geo
I.H. Unit...
Have fun..
Thanks GEO, Yes i replaced IH pwb.
-
Re: kYO-6500I FUSER ERROR C6030
I would check that connector that the fuser plugs into.
Last edited by Tonerkiller; 06-20-2017 at 09:14 PM.
-
Re: kYO-6500I FUSER ERROR C6030
did you do u906 OR u163 to reset code?
-
Technician
- Rep Power
- 16
Re: kYO-6500I FUSER ERROR C6030
Hello
There has been a change for this code since Firm V3.06
(Corrective measures for the C6030 error (Broken fuser thermistor 1 wire).
The service call error condition below is eliminated that depends on the environment and printing condition.
-The TH2 as thermistor 2 detects 30oC or less while the TH1 as the thermistor 1 detects 70oC or more during warm-up (eliminated).)
Can be tested with a new Firm.
best regard
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks