Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Service Manager 1,000+ Posts
    5500i Tray 4 jamming 1504

    Join Date
    Feb 2010
    Rep Power

    5500i Tray 4 jamming 1504

    Got a machine with tray 3,4 option (PF-730) jamming rather consistently with J1504 non arrival jam at the PCS (paper convey sensor). Only from tray 4 both directions.

    Found a bulletin from year 2013 about new style actuator that triggers the PCS, this part is on order but I am not convinced because it only occurs from tray 4.

    Rollers have been replaced.

    I have several parts on order (tray 4 feed unit, vertical feed clutch, bulletin parts and feed motor unit) but if someone has seen this before it may be something out-of-the-box I need to know

    Thanks in advance

  2. #2
    Trusted Tech 50+ Posts Rick Martinez's Avatar
    Join Date
    Sep 2009
    San Carlos, CA
    Rep Power

    Re: 5500i Tray 4 jamming 1504

    had a similar issue long ago which gave me a big headache for a while, found out that the clutch Kyocera uses has metal shims and with time they rust and stop working making the paper no reaching the sensors on time. you can take them apart and clean/sand them but i recommend to replace them.
    part# 302KV44041
    hope this helps.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here