Results 1 to 6 of 6
  1. #1
    Owner/Service Manager 1,000+ Posts
    356ci DP-5100 J9110

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    356ci DP-5100 J9110

    I have a 356ci that is giving me jam 9110. The page pulls in, then the pickup & feed rollers stop. I've replaced the tires & sep pad. It's a new machine with only 765 pages through the ADF. It's had 21 jams, so not a ton, but still.
    I tried pulling the cover off to watch the back, but you can't see anything with a metal plate between the motors & gears.
    I also installed bulletin H068 for folding corners, but it didn't resolve the jamming issue.
    Anybody have info regarding this ?
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Apr 2017
    Location
    Manitoba
    Posts
    348
    Rep Power
    20

    Re: 356ci DP-5100 J9110

    have you tried shoving a manila folder through the feeder path to see if anything is stuck, or mylar flipped inside? maybe there's a sticky-note inside...

  3. #3
    Owner/Service Manager 1,000+ Posts
    356ci DP-5100 J9110

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: 356ci DP-5100 J9110

    Thanks Sparky. Just got back from the machine, it would pass paper but jam intermittently. We had a 306ci in our office, which after a little research, uses the same drive unit for the ADF as the DP-5100.
    I replaced it & scanned 200 pages no problem. I could get it to jam within about 15 pages yesterday. I'm guessing the feed motor has a bad spot in it.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  4. #4
    Master Of The Obvious 10,000+ Posts
    356ci DP-5100 J9110

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: 356ci DP-5100 J9110

    Quote Originally Posted by tmaged View Post
    Thanks Sparky. Just got back from the machine, it would pass paper but jam intermittently. We had a 306ci in our office, which after a little research, uses the same drive unit for the ADF as the DP-5100.
    I replaced it & scanned 200 pages no problem. I could get it to jam within about 15 pages yesterday. I'm guessing the feed motor has a bad spot in it.
    Any clutches in that clutch pack? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Owner/Service Manager 1,000+ Posts
    356ci DP-5100 J9110

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: 356ci DP-5100 J9110

    I don't see any clutches at all. Just some motors, one-way gears & the wrap spring on the feed roller.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  6. #6
    Trusted Tech 50+ Posts mita's Avatar
    Join Date
    Sep 2010
    Location
    Atlanta,GA
    Posts
    87
    Rep Power
    28

    Re: 356ci DP-5100 J9110

    We have found that on some the side guides are just a bit tight. Try trimming the stops so it opens up a bit more and test it.
    Brian

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here