Kyo M6535cidn Black drum marks

[n25an]

gotta ask... where you find the service bulletins on the us site... and an english pdf of the bulletin that I found...

[Mr2crazed]

I'm seeing this issue also on the TA306ci and didn't know about the bulletin. I ordered a replacement drum nearly a month ago and is on backorder until 11/17.

[jmaister]

you can scratch those things off with finger nail with paper covering carefully. done it too many times.

The worst is the developer on those things, comet dropping like the 250ci, hopeless.

[JettTexas]

I can't seem to find/download this H139 bulletin. Can anyone send me a copy/working link to it?

[nathicana]

Here is H139

[craigster]

here is the bulletin

[JettTexas]

Thanks!!

[Robob]

Searc
hed kda download center, can't find...???

Thanks!

But seriously, Kyocera needs to do something about their bulletin search. This is literally how the bulletin comes back when I searched "H139" what cryptic garbage. You would think DEFECTIVE DRUMS could earn a bulletin spot on the machine's main resource page.

E:\\TechQA\\2017\\QA_H139_2NR_0036_SB.pdf | 100% | 2NR-0036(H139) ...2NR-0036(H139) DateJuly 14, 2017 ...2NR-0036(H139) DateJuly 14, 2017 Affected serial no.Remarks

[FriendlyTech]

Thanks!

But seriously, Kyocera needs to do something about their bulletin search. This is literally how the bulletin comes back when I searched "H139" what cryptic garbage. You would think DEFECTIVE DRUMS could earn a bulletin spot on the machine's main resource page.

E:\\TechQA\\2017\\QA_H139_2NR_0036_SB.pdf | 100% | 2NR-0036(H139) ...2NR-0036(H139) DateJuly 14, 2017 ...2NR-0036(H139) DateJuly 14, 2017 Affected serial no.Remarks

Agreed I hate the download center.

[iscott]

try using some " Nu-Finish" car polish on the charge roller.. apply and buff off two times... it make the print bolder and keeps the charge roller from building up again....

some ricoh drums were supposed to last 100k ( K&color) they were only making it 30-50k until I showed the boss this trick... saved him money and I got a lil spiff in my next paycheck.

Do you apply the Nu-Finish with the charge roller in place or do you remove it from the drum assymble. Any specific type of towel that you use to buff it out with?