Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 32
acil kyocera mita fs-1018 mfp
kyocera mita fs-1018 mfp Arkadaşlar ben forum yeni katıldım C-6400 error arızası var.,yardımcı olursanız sevinirim
Last edited by facatoros; 08-30-2008 at 02:29 PM.
Reason: kyocera mita fs-1018 mfp
-
just reset the fuser code with sim 163
i think here is the solution,
http://www.copytechnet.com/forums/ky...ror-codes.html
Here's the real way to reset that fuser code.
First open top cover then turn on power.
press system menu/counter
arrow down to service
press and hold start, # then enter keys
arrow down to maintenance
press enter
arrow down to Sim 163
press enter
select execute
press enter
turn off power then back on
Hope this helps you
i have that error in the past and that procedure works.
regards
Last edited by milarioan; 08-30-2008 at 06:58 PM.
-
Technician
- Rep Power
- 32
I've had that error, if I'm not mistaken it was the thermostat open circuit in the fuser unit. Whilst the fuser unit is out, might as well check the heater lamp.
-
Technician
- Rep Power
- 33
sim 163 ten resetle kardesim
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks