Dislikes:
0
-
P3045DN
I give up...... I've read and googled all I can.....
I need to adjust lead edge.
I'm familar with 10871087 U034, however it appears I can't get to this mode with printer.
I believe I need to adjust with the following command...... "!R! KCFG “PFRC”,1,1,xx;EXIT" where "xx" is the amount of adjustment.
How do I deliver this command to the printer? I've read about a "Jar Util" and "ICLink32"
Any guidance here greatly appreciated.
TIA
-
Re: P3045DN
Kyocera Net Viewer can be used to send those strings to the device.
right click on the device listed in KMNV, go to "advanced", select "TCP/IP Send Data" and in there enter the commands in the Data field, with "Text" checkbox checked.
or you can make a USB stick with the command in a text file that you "print" via the menu... I forget the details of arranging that off the top of my head as it's quitting time, I'll just recommend that you search on here, that subject has been covered before.
-
Re: P3045DN
You can dump the command thru the ftp site of the printer.
-
Re: P3045DN
Just a heads up ... you can also send them through KFS.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks