Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jan 2011
    Posts
    58
    Rep Power
    27

    Kyocera KM-7551CI Concertina's at Register stop rollers when copying in colour.

    I am a bit baffled, the 7551 Was reported as jamming. I tested the machine and found that it works 100% when doing black & white copies or prints from all trays including A3 and A4r landscape and bypass. As soon as I selected colour copies or prints the machine jams 1st copy at the register stop rollers and concertina's there and does not reach the 2nd transfer or fuser. This happens only on A4 portrait and A3, A4R landscape is copying or printing in colour no problem.
    Any ideas.
    Thanks

  2. #2
    Master Of The Obvious 10,000+ Posts
    Kyocera KM-7551CI  Concertina's at Register stop rollers when copying in colour.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: Kyocera KM-7551CI Concertina's at Register stop rollers when copying in colour.

    It sounds to me like you are experiencing an error code not a jam code. And you didn't provide any code. It might be a good idea to see what codes are occurring, then look them up in the manual. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Apr 2013
    Posts
    36
    Rep Power
    23

    Re: Kyocera KM-7551CI Concertina's at Register stop rollers when copying in colour.

    I had a similar problem on a 6551 where letter-r (portrait), legal or ledger would jam when duplexing, letter (landscape) worked fine. And all sizes worked in simplex. Ended up being Feed Drive H Unit (302N493031). Clutches were very rusty.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here