Thanks: 
Likes: 
Dislikes: Looking at the service manual, cannot find any reference on how to go about/procedure to replace/run the developer process. What info is missing? Thanks.
Looking at the service manual, cannot find any reference on how to go about/procedure to replace/run the developer process. What info is missing? Thanks.
There is no "developer change", Kyocera went away from that a long time ago. Replace the entire developing unit.Originally Posted by tech28
Part number: 302LH93034
Name: DV-6305 - Developing Unit for TASKalfa 3500i/4500i/5500i/3501i/4501i/5501i
Did install a new developer unit from a PM kit and copies came out blank
Is there a simulation for that to install the developer?
The developer units are packaged with an insert against the sleeve roller to prevent leaking. It's black and easy to miss.
What "wragsdale said...
DOH! missed it! Thanks guys! Have a good weekend and a Very Happy Thanksgiving!!
Congratulations on your success. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Posting Permissions
Reply With Quote
Bookmarks