Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Oct 2017
    Posts
    3
    Rep Power
    0

    kyocera KM2560 prints 4 inches top of page

    hello I have a kyocera km2560 copier that will only print about 4 inches of the top of the page did a full maintenance and still same problem any one have any suggestions

    Thank you


  2. #2
    Trusted Tech 50+ Posts The_Murph's Avatar
    Join Date
    Mar 2016
    Location
    Erie, CO
    Posts
    97
    Rep Power
    4

    Re: kyocera KM2560 prints 4 inches top of page

    Quote Originally Posted by Bakkano1 View Post
    hello I have a kyocera km2560 copier that will only print about 4 inches of the top of the page did a full maintenance and still same problem any one have any suggestions

    Thank you

    Is it a sharp cutoff or is it somewhat inconsistent. Also is it tray specific? what about large sizes, does it print a specific sized area on 11x17? These answers may provide the necessary data to help figure this out.

    If you phrase your inquiry properly, you will get the answers you seek...

    Good Luck ... You'll need it! HAHAHA!

    ~Big Dan~

  3. #3
    Junior Member
    Join Date
    Oct 2017
    Posts
    3
    Rep Power
    0

    Re: kyocera KM2560 prints 4 inches top of page

    Quote Originally Posted by The_Murph View Post
    Is it a sharp cutoff or is it somewhat inconsistent. Also is it tray specific? what about large sizes, does it print a specific sized area on 11x17? These answers may provide the necessary data to help figure this out.

    Itís all sizes and on copies faxes and prints itís a fade not a cut off and happens from all trays


  4. #4
    Master Of The Obvious 10,000+ Posts
    kyocera KM2560 prints 4 inches top of page

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,402
    Rep Power
    249

    Re: kyocera KM2560 prints 4 inches top of page

    I'm thinking that you did not run simulation U130, so the developing unit is filling verrrrry slllooooowwwly with the monocomponent toner. There is a simulation sheet in that maintenance kit that would have told you to do this.

    Just a hint: If you want an opinion on a quality issue, maybe you should include an image? =^..^=

    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

  5. #5
    Junior Member
    Join Date
    Oct 2017
    Posts
    3
    Rep Power
    0

    Re: kyocera KM2560 prints 4 inches top of page

    Hi I tried the u130 it got a little better have about 10 inches now from the top

    Attached Images Attached Images

  6. #6
    Master Of The Obvious 10,000+ Posts
    kyocera KM2560 prints 4 inches top of page

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    15,402
    Rep Power
    249

    Re: kyocera KM2560 prints 4 inches top of page

    That particular image sample doesn't tell me very much. try this:

    Attached Files Attached Files
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.


    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-=-=-=-=-=-


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here